hello somebody could help me, they could tell me that conax is this pleas, if somebody has some tool me serious very useful, all the information is welcome thank you

Trying to reset card...
Reset Successful
ATR: 23 DB FF F3 BD F3 F3

Trying to reset card...
Reset Successful
ATR: 3B 24 00 30 42 30 30
Convention: DIRECT
Protocol: T=0
TB1 = 00
Historical Bytes: 30 42 30 30
0 B 0 0
Programming Voltage = 0.0 volts
Programming Current = 25ma
Maximum Clock Frequency = 0.0MHz
This card uses an internal clock:
Work ETU = 0.0001041667 seconds
Guard Time = 0.0012500000 seconds
Baud Rate After Reset = 9600

You must write what provider you have...
Many provider´s use that ATR.
It´s quite about conax systems.
Mutch to explore about the smartcard.
No clean specifications about conax providers.
Presumably high secure system. (With very few bug´s at these day´s)

;Canal digital sweden
DD 26 00 00 XX->

Nano 06 ???
Nano 10 Host version
Nano 11 Read UA/SA
Nano 12 EMM
Nano 13 Init ECM
Nano 14 ECM
Nano 1B PPV purchase information
Nano 1C Subscription information
Nano 1D Pincode verify
Nano 1E Pincode write
Nano 1F Pincode verify
Nano 66 UA information
Nano 68 Random data
Nano 75 Data counter

ASO

I have elvis programer and cas3 and they both can be set in phoenix, can someone tell me what software to use to read conax card.
Thanks

I have elvis programer and cas3 and they both can be set in phoenix, can someone tell me what software to use to read conax card.
Thanks

Winexplorer.

Do some logging then try to send to card with winexplorer.

Example:

sub main()
sc.write("dd26000003")
sc.read 1
sc.write("100100")
sc.delay 200
sc.read 2
sc.write("ddca000011")
sc.delay 80
sc.read 17
sc.read 2
end sub

INS DD
Nano 10
Reply SW1:98 SW2:11
CLA CA
Read out buffer LEN 11 (SW2)

Thank you guys