MM Nordic NDS

--------------------------------------------------------------------------------

Support for Viasat NDS Card in the good old Magic cam

No need for enter boxid, just prog the cam, insert card and wait 60 sec.

Tested and 100% working

needed : UCAS2, MM or Matrixcam, original NDS-card with subscription

1) erase flash

2) If you have converted your magicmodule to matrixcam, or you have a matrixcam, you have to flash the xilinx chip with "magic.cas"

3) flash the MagicModule at address 0x00000000.

4) insert module in reciver

5) insert NDS-card ( with subscription ), remember that chip is up on MM

6) wait about 60sec.

7) if it works, you will have picture.

The camcrypt takes some time to init. (60 seconds)
You can log with season interface and you will se that the "D0BC000050" command is causing the big init delay.

Tested with
dreambox (different images) OK
nokia 220S OK
Samsung 9500AY OK ( meny does not work, still says "no module" but it decrambles ok )
Force 755 OK
Force 1145/1155 OK
Force 1122/1133 OK
Topfield 3000coci OK


ENJOY