X-D Cuando meto la x-cam en cas3 me sale modulo x-cam y no me deja cargar ningun soft. haber si alguien me puede ayudar.

Ciao.Quando inserisci la x-cam nel cas3 devi inserire la dummy card nella cam.Se non lo fai non programmerai mai la cam.Quando avrai inserito la dummy card nella cam seleziona il blocco 2 e quindi clicca sul bottono con ... per selezionare il file bin.Una volta programmata la cam, seleziona il blocco 14 ed inserisci il file softcam.key per le chiavi.


Hi. When you put your x-cam in cas3, you must insert the dummy card in the cam.If you don't do it, you' ll never program the x-cam.After you inserted the dummy card in cam select block 2 and then click on button ... to select the file bin.After the programming, select block 14 and insert the file softcam.key for the keys.

O-) Gracias por la respuesta pero la dummy la inserto pero el mensaje a la hora de cargar los files es modulo x-cam y no se mueve de ahi.

Hi Cachimi.What program do you use to program x-cam? I use Cas studio 6.6b.If you haven't it , you can download it on

[URL="http://www.duolabs.com/down-cas3.htm"]

Another question, where are you from? I don't understand very well spanish, because I'm italian.
:-)

;-O gracias pero ya tengo el cas 6.6b con cas interface3 y dummy pero el mensaje es el mismo MODULO X-CAM

Hi cachimi.Try in this way:
1 start cas interface studio 6.6b
2 connect the cas 3
3 insert the dummy card in the x-cam
4 select in the cam's menù the x-cam you have
5 on the right top of the window on the right side, click on the button ...
6 select the bin file for the x-cam
the programming will start automatically
7 select block 14
8 click on the same button on the right top of the windows
9 select a softcam.key file to insert the keys in cam

With this way I program my x-cam successfully withouth errors ;-)

P.S. Just a question: the x-cam is correctly connected by the cas3 when inserted in it?

;-O lo siento pero no me deja el menu solo sale MODULO X-CAM y si doy al menu se que todo parado y solo me deja la opcion de volver atras.

Nel menu della CAM devi selezionare SERIAL UPDATE-ACTIVATE LOADER

X-O Ahora la cam no me deja ningun menu solo modulo x-cam

Sintonizzati su un canale in chiaro